ELEC BUMI SDN BHD


	ATG Airport Lighting

	Nexans

	OSRAM

	Philips (VOSLA)

	UK McWilliam

	weber

weber.tec cable grout - certite cable grout

weber.tec cable grout is a low-modulus, semi-flexible polyester resin compound for filling cable slots. Can be used in asphalt, bitumen and concrete surfaces. Use for gaps 5 mm to 16 mm wide.

Uses

Grouting runway lights
Fixing vertical bolts, starter bars and dowels
Grouting anchor bolts and holding down bolts

Features and benefits:

Easy to mix and place
Does not segregate or bleed
Rapid setting for quick return to service
Can be used in cold weather down to 0°C
Good abrasion resistance
Excellent chemical resistance
Available in two colour grades: black for asphalt; grey for concrete
Available in 3 grades depending on application temperatures

weber.tec grout FG - certite pourable grout fine grade

weber.tec grout FG is a two-component polyester grout for anchoring and fixing. Fast-setting for rapid installation and can be used down to 0°C. Flowing grout to fill gaps of between 5 mm up to 90 mm dependent upon bulking out with aggregate.

Uses

Grouting runway lights
Fixing vertical bolts, starter bars and dowels
Grouting anchor bolts and holding down bolts

Features and benefits:

Fast-seting with rapid strength gain, allowing loads to be applied within 2 hours at 20°C
Economical usage through part mixing by volume
Available in standard, rapid and tropical grades depending upon temperature
Excellent adhesion to concrete and asphalt substrates
Can be bulked out for varying gap sizes, 5 mm – 90 mm
Proven technology with reliability